BC RACING BR COILOVERS FOR NISSAN SKYLINE GTS ECR33 95-98

Quick Overview

BR Series Street and Circuit Coilover

  •  Pillowball upper mount
  • Camber adjustable top mounts
  • Aluminium top plates
Additional Information
  • Manufactured by: BC RACING
€920.00

Description

BR Series Street and Circuit Coilover

  •  Pillowball upper mount
  • Camber adjustable top mounts
  • Aluminium top plates
  • 30 way adjustable damping
  • Adjustable spring platform
  • Height adjustment via bottom mount to retain full damper travel
  • Bearing mounted upper front spring platform
  • Dust boot to protect damper seals
     some features are dependent on model

 The BR series coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximise oil capacity. 

 As the damper unit opearates the oil contained within heats up.  The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit. 

BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body.  This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance

Ride height adjustment:

Ride height is determined by the position of the coilover bottom mount.  The mount can be wound up and down the damper body to give a full range of adjustment from near standard ride height to so low it wouldn’t be drivable on the road. 

 Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.

Damping adjustment:

BR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use.  This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions. 

 By tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.

 If you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres.  This maximises traction and helps prevent wheel spin.  To achieve this you would soften the rear dampers to allow faster compression.  If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced. 

Conversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction.  This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track. 

Pillowball (rose joint) upper mount:

Many of the BC Racing BR coilovers come with pillowball upper mounts.  The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish. 

 

The pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.

Corrosion protection:

The damper units are black chromed steel to give superb durability even through the darkest of European winters.  The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating.  A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.

High quality coil springs:

BC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel. 

 

The springs are compression tested through over 500,000 cycles with less that 5% deformation.

High quality oil:

BC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions. 

 As the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil.  Poor quality dampers use cheap oil whose characteristics alter with varying temperatures.  Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range.  Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics. 

 BC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn’t degrade quickly over time thus extending the dampers operating life significantly.

Fitment:
Nissan Skyline ECR33 95-98  

Front Coilovers : Pillow ball or Rubber Top Mount.(application dependent)

Front Spring Rate : 8kg/mm

Rear Coilovers : Pillow ball or Rubber Top Mount. (application dependent)

Rear Spring Rate : 6kg/mm